Description
ACE BACKSTAGE CO., INC.’s high capacitiy use Super Horizontal Panel
Stage Pockets are the same size as the ACE Full Pockets with Back Box
except they provide almost 3X the CONNECTIVITY capacity using
a Horizontal Panel Design. The basic construction incorporates 3
sub-assemblies: 1) A unique Trim-Bezel lid assembly with spring loaded
hinge pins and hinged cableway slot closure that mounts directly to the
Back Box, 2) A set of panel mounting and A.C. barrier isolation raceway
brackets, and 3) Super Pocket Body (#BRK102BBX Back Box).
The Super Pocket features welded heavy duty steel construction,
choice of 3 decorator oven cured powder coat finishes (for the
trim-bezel lid assembly), 2 lid choices (Standard Lid (SL) and Carpet
Lid (CL)), plus solid brass or stainless steel trim bezel lid assembly
finishes. Add a host of stock prefabricated or custom audio,
communications, control, data, electric, video, and voice panels and
connectors for a complete Stage Pocket System. The in-floor appearance
is the same as the Full Pocket.
The Super Stage Pocket has the panel capacity for either:
• (4) #PNL-100 Series CONNECTRIX Panels or
• (4) #PSW-100 Series Switchcraft® Panels or
• (2) #PNL-120 Series CONNECTRIX Panels or
• (1) #PNL-140 Series CONNECTRIX Panel
The Super Stage Pocket has the connector capacity for either:
• (24) CONNECTRIX Connectors or
• (24) Neutrik® Connectors or
• (24) Switchcraft® Connectors or
• (25) CONNECTRIX Connectors (using the #PNL-1425 Panel w/ center bar breakout)*
All ACE Super Stage Pockets Trim-Bezel Lid assemblies are heavy duty
welded steel construction, with a 1/8″ (nominally 11 ga. (.120″)) thick
CRS steel Lid and Mounting Flange. The 14 ga. (.071″) thick CRS steel
Super Pocket Body Back Box is precision die formed and jig welded. The
Super Stage Pocket resists bending under even the most severe stage
loads.
Removable spring loaded hinge pins permits easy exchange of lids for
carpet lids, locking lids, standard lids, and other custom application
lids. A generous cable way slot of 3/8″ x 8″ permits easy cable exit
from the stage pocket, even for large gauge cables. A cableway slot
closure channel closes the slot when not in use. The Super Stage Pocket
has an easy installation into 10″ x 10″ cutout in the stage floor. Open
easy access from top of the Super Stage Pocket to connector panels makes
for easy installation.
A scratch/wear resistant finish, oven cured powder coat is
electro-staticly applied inside and outside the entire trim-bezel lid
assembly. Decorator neutral Antique Copper Vein or Textured Black
finishes are standard. A Solid Brass Lid and Mounting Flange as well as
Solid Stainless Steel Lid and Mounting Flange are also available by
special order. The Super Pocket Body Back Box comes with a clear zinc
finish (Mil Spec QQ-Z-325E Type I, Class II). The Super Stage Pocket’s
solid rubber Lid Stops cradle the lid to prevent lid rattle.
• Super Stage Pocket Body Size = 10.000” W x 6.000” H x 10.000” D
• Super Stage Pocket Lid & Mounting Flange Size = 10.500” W x 0.937” H x 10.500” D
• Super Stage Pocket Connector Capacity = Up to 25 CONNECTRIX, Neutrik®, or Switchcraft®*
• Super Stage Pocket Cutout Dimensions = 10.000″ W x 10.000″ H
• Super Stage Pocket Material = CRS Steel and/or Solid Half Hard Brass
• Super Stage Pocket Panel Capacity =
• (4) #PNL-100 Series CONNECTRIX Panels OR
• (4) #PSW-100 Series Switchcraft® Panels OR
• (2) #PNL-120 Series CONNECTRIX Panels OR
• (1) #PNL-140 Series CONNECTRIX Panel
