Sale!

CRESTRON QM-WMC-VCC-B-T WALL PLATE QUICKMEDIA MEDIA CENTER, BLACK, TEXTURED

$1,100.00 $149.00

1 in stock

Category:

Description

restron® MediaManager is a comprehensive family of affordable
products fusing high-performance AV signal distribution, device
control, and facility-wide system management. MediaManager simplifies
the art of ProAV system design and installation with complete hardware,
software, and low-cost wiring solutions. Whether installing a single
boardroom or a campus-wide network of AV systems, MediaManager delivers
power and value far beyond conventional products and designs.

The QM-WMC-VCC QuickMedia Wall Plate Media Center provides an elegant
wall mount multimedia interface solution for any MediaManager system,
including applications ranging from small conference rooms to large
banquet halls and auditoriums.

Wall Mount Multimedia Interface

The QM-WMC-VCC installs cleanly in a standard electrical box or trim
ring. Individual video inputs are provided for composite, component, and
RGB signals, each with corresponding stereo audio, to accept
connections from portable AV devices and computers. A buffered monitor
pass-thru connector is also provided to feed the RGB input signal to a
local monitor.

Connectivity for LAN and other signals can easily be added by ganging
the QM-WMC-VCC together with other 3rd-party wall plate devices. A
Crestron C2N-DB or C2N-CBD
series keypad may also be installed for a truly complete multimedia
interface and control solution. Wiring for the QM-WMC-VCC is extremely
simple requiring just a single CresCAT®QM cable (sold separately).

AV Switcher

The built-in 3X1 switcher includes audio breakaway to allow the three
program audio inputs to be switched independent of the video and RGB
inputs, or linked with them. Built-in video sensing on every video/RGB
input can be utilized to trigger automatic input selection and power
control.

Gated Mic Preamp (Optional)

Two gated microphone inputs may be added using the QM-WMIC
Microphone Input Module (sold separately). Via two Neutrik® Combo
connectors, the QM-WMIC supports both dynamic and condenser type
microphones with software switchable 48V phantom power available at both
XLR inputs. Balanced or unbalanced line-level sources can also be
accommodated using the 1/4″ TRS connections. Input gain and gating
controls for each microphone/line input are fully adjustable at setup,
and can also be controlled in real-time from a keypad or touchpanel.

QuickMedia® Transport

Using the revolutionary QuickMedia transport, all input signals are
transmitted from the QM-WMC-VCC to any QuickMedia Receiver or
Distribution Center over a single inexpensive CAT5e type cable[1].
Computer resolutions up to 1920 X 1200 pixels at 60Hz are supported
over cable runs up to 450 feet. Audio signals are transmitted digitally
with high-performance 24-bit resolution. QuickMedia dramatically
simplifies system design and installation, affording a higher level of
performance at a lower overall cost.

MediaManager System Integration

Whether using just one Wall Plate Media Center or several, complete
system operation can be made transparent to the end-user with all signal
routing occurring smoothly under the command of the MediaManager
control system. Complete MediaManager systems are easy to design,
program and adjust from start to finish using Crestron SystemBuilder™ software.

 

Key Features
  • Wall mount QuickMedia multimedia interface
  • Single-cable signal transmission up to 450 feet
  • RCA composite & component video inputs
  • DB15HD RBG computer input
  • Buffered RGB monitor pass-thru
  • 3 stereo audio inputs
  • Video input signal sensing
  • 3×1 input switching with audio breakaway
  • Compatible with QM-WMIC Mic Input Module
  • QuickMedia transport | Cresnet communications
  • Low-cost, quick and easy installation
  • Integrates with Crestron Cameo and Decorator keypads
  • Available in white or black

 

Brand

Crestron

Additional information

Model

MPN

Brand