Description
Features:
- Clean and simple architectural design
- Same components and voicing as the Commercial
- Design ceiling loudspeaker family
- High efficiency, high output, high intelligibility, low distortion
- Paintable enclosure constructed of high-impact ABS plastic to reduce resonances
- Front-accessible power tap switch for selectable 8 ohm or 70V/100V operation
- Low profile pan-tilt mounting yoke included
- Horizontal or vertical mounting orientation
- Weather-resistant construction with treated drivers, two-layer powder coated grilles and protected wiring ingress
- Available in standard black or white finishes
APPLICATIONS
Swimming pools
Sports stadia, sports facilities
Health and fitness clubs
Houses of worship
Retail environments
Cruise ships
Corporate training rooms
Bars and restaurants
The
CS8 incorporates the same 8-inch full-range loudspeaker (as the C8) in a
black or white paintable ABS surface mount enclosure. It also has a
more focused dispersion than the smaller models. It contains a
proprietary Tru-Phase™ waveguide that produces a consistently wide
conical polar response up to 16 kHz. The CS8 features a genuine coaxial
design using separate magnets for the LF and HF drivers for reduced
distortion and high sensitivity, thereby permitting up to 3 dB greater
output level while requiring up to half the amplification power of
competing products.
Easily outperforming loudspeakers of a larger
size format, the CS8 provides high power handling, high sensitivity and
realistic sound reproduction. This loudspeaker is equipped with a
built-in autoformer, allowing large numbers of distributed loudspeakers
to be powered from a 70V or 100V amplifier output. A convenient
front-accessible power tap switch is hidden behind a rotatable logo.
Installation is simple and flexible using the included multi-angle
pan-tilt bracket which allows low profile mounting and precise
positioning of the enclosure in either horizontal or vertical
orientation.
Thanks to the internally reinforced, black or white
paintable ABS enclosures, zinc-rich epoxy dual-layer powder-coated
grilles and brackets, weather-treated drivers, and the included IP56
sealed wiring cover, all standard surface mount models are equally
suited for indoor or outdoor direct exposure applications.
Specifications:
Finish: Black or White ABS matte plastic, paintable with dual-layer powder-coated steel grille
Nominal Beamwidth (H x V): 110° Conical
70V/100V Autoformer: 30W, 15W, 7.5W, 3.75W (@70V only)
Continuous Max Output: 107 dB (113 dB Peak)
Power Handling: 60W continuous @ 8 ohms
Operating Range: 45 Hz – 13.5 kHz
Sensitivity (1W/1m): 89 dB
Transducers: LF – 1 x 8″; HF – 1 x .75″ exit compression driver
Dimensions (H x W x D): 9.7″ x 13.8″ x 12.4″ (247 x 351 x 315 mm)
Available options on this item:
