ELAN PulseWorx Keypad Controller 6 Button Wall Mount KPCW6W

The KPCW-6 6-Button Keypad Controller is a high quality home
automation keypad device that is capable of transmitting and receiving
digital commands and status over the existing powerlines.

Control single lights, trigger dramatic scenes, or send messages to a central controller.

Operation

The KPCW-6 is perfect for controlling all UPB-compatible load control
devices such as the PulseWorx Wall Switch Dimmers, Fixture Modules,
Lamp Modules, Appliance Modules, Output Modules, etc. The KPCW-6 has
eight blue backlit horizontal pushbuttons that can be custom engraved
(for a nominal charge) for ease of use and to add beauty and
functionality to any room. The backlit pushbuttons illuminate when
pressed or when a button or load they are tracking is activated.

Select from 16 commands to be transmitted when each pushbutton is
tapped, double-tapped, held or released. This allows the KPC to remotely
control other UPB-compatible devices and/or update feedback indicators
(like LEDs).

Optionally toggle between two different commands per pushbutton. Tap
the button once to activate a scene – and light the LED indicator. Tap
it again to deactivate the scene – and extinguish the LED indicator.

The KPCW-6 is a wire-in wall mounted device. Installation is simple – just mount in a wall box and connect to line and neutral.

Infra-Red (IR) Remote Control

The KPCW-6 interfaces with the IRR Infra-Red Keypad Remote (sold
separately). This credit card sized device reproduces the buttons on the
front of the Keypad Controller and allows up to four separate “IR
Remote” addresses to enable four KPC’s in the same room without
interfering with one another. The IR codes can easily be stored into
more sophisticated programmable/learning IR remote controls.

LED Presets

New for PulseWorx Generation 2 is an LED Presets feature that allows
you to configure the LED indicators to better track the state of
selected loads. Know immediately if the light in your children’s room
was turned on or off. Have two or more Keypads track each other’s LED
indicators to obtain 3-way and multi-way functionality.

PulseWorx Lighting Control System

The Keypad Controllers are designed to be an integral part of a complete
PulseWorx Lighting Control System. Like all PulseWorx devices, the KPC
uses the patented UPB(TM) powerline communication technology (invented
by PCS) to reliably communicate with any other UPB-compatible device(s)
over the existing house electrical wires. No new wires are necessary
making PulseWorx perfect for retrofit situations. When initial
configuration is complete, a single push of a button is all you need to
activate any group of lights (or virtually anything else that connects
to AC power wiring) throughout the house simultaneously.