ATLONA 4K-HDVS-WP-EXT HDMI/VGA OVER HDBASET 2X1 SWITCH WALL PLATE EXTENDER KIT

Description

• 2×1 HDMI & VGA Wall Plate Switcher with HDBaseT Ethernet Output

  The 2×1 HDMI & VGA Wall Plate Switcher from Atlona
  features a two-gang, Decora form factor with an HDMI and VGA input, and
  an always-on 3.5mm audio connector. Signal support includes HDMI up to
  4K/UHD @ 60 Hz (YUV 4:2:0 color sub-sampling), VGA input signals up to
  1920 × 1200, embedded audio, and control signals which can be extended
  up to 328’. The switcher receives power from the AT-HDVS-200-RX scaler
  via Power over Ethernet, and together they create a standalone AV
  switching and control system with scaling. Display control and volume
  commands are transmitted via CEC, IP, or RS-232 to any display, control
  system, switcher, or other controllable device.

  The wall plate
  switcher can be the central component of small, automated AV systems
  for classrooms and huddle rooms. The automatic display control turns on
  the display automatically whenever a source is connected. When the
  source is removed, the display turns off. Volume is controlled via the
  front panel or other control signals. Automatic input selection on the
  switcher works by sensing the presence of any video signal. With
  automatic input selection, manual control systems can be eliminated.

  Using
  the AT-PS-POE (not included), the switcher can connect directly to
  Atlona HDBaseT receivers, such as the AT-UHD-EX-100CE-RX, or projectors
  with HDBaseT inputs, enabling simplified control and adding legacy VGA
  inputs at the HDVS.

  2×1 HDBaseT Switcher

  • Features one HDMI input, a VGA input, and 3.5mm audio connector
  • Allows advanced HDMI display devices to be used with legacy VGA sources

  Automatic Display Control

  • Automatically changes projector power state based on
    active or standby mode of switcher; control signals are transmitted via
    CEC, IP, or RS-232
  • Eliminates need for complex control system in AV systems; CEC enables control of low-cost consumer displays

  Automatic Input Selection Using Video Detection Technology

  • Selects active input when sources are connected
  • Eliminates need for a complex control system in AV systems

  TCP/IP and RS-232 Control of Switcher

  • Flexible control options for compatibility with third-party control systems; RS-232 controlled from HDBaseT connection
  • Reduces integration time and costs

  Ethernet-Enabled, HDBaseT Extension

  • One Ethernet connection connects both TS and RX for control and management; transmits IP and HDMI up to 328 ft
  • Uses easy-to-integrate category cable for low-cost, reliable system installation; enables control of switchers (CLSO0824)

  Front Panel Input Select Button

  • Overrides auto-switching when two active sources are present
  • Simple manual control allows presenter to maintain control of AV system

  Front Panel Display On/Off Control

  • Offers convenient user features to override auto-switching when two active sources are present
  • Features display and volume control
  • Simple manual controls allow presenter to maintain control of AV system

  Front Panel Volume Control

  • Remotely controls audio volume using TCP/IP or RS-232, and provides ‘Mute’ mode
  • Eliminates need for manual operation of display or use of IR remote control

  Works with Atlona AMS

  • This IP-controllable product can be remotely managed by the Atlona Management System software
  • Integrates product configuration, management, and updates to reduce installation time and enable remote support

  
  UPC: 846352004644
• 4K/UHD HDMI over HDBaseT Receiver with Ethernet, Control, & PoE (328′)

  The power sourcing 4K/UHD HDMI over HDBaseT Receiver from Atlona supports
  AV signals up to 328’over category cable with Ethernet pass-through,
  RS-232, CEC, and Power over Ethernet. It is compatible with signals up
  to 4K/UHD @ 60 Hz with 4:2:0 color sub-sampling, plus embedded
  multi-channel audio and remote 48V power for the transmitter. The
  receiver is ideal for use with the AT-HDVS-200-TX transmitter (sold
  separately) for passing 4K signals to a display. It is HDCP 2.2
  compliant and supports EDID communication. The receiver features a
  quarter-rack width metal enclosure for installation with rear panel I/O
  ports for uncluttered wire management. This PSE (Power Sourcing
  Equipment) device is powered via the included desktop power supply, and
  provides PoE to the AT-HDVS-200-TX or other PoE-compatible transmitters.

  4K/UHD Capability

  • Compatible with Ultra High Definition sources and displays
  • Full support of 4K/UHD streaming services and playback devices

  HDCP 2.2 Compliant

  • Adheres to latest specification for High-bandwidth Digital Content Protection
  • Allows protected content stream to pass between devices

  PSE – Power Sourcing Equipment

  • Uses external power supply (included) to power remote PoE-compatible HDVS series transmitters over HDBaseT
  • Eliminates the need for the receiver to be powered remotely or by a power-injection device

  AV, Ethernet, Power, and Control over HDBaseT

  • Receives 4K/UHD video, audio, 100BaseT Ethernet, power, and control through a single cable
  • Eliminates multiple cable runs between source, control system, router, and display¹

   

  Extended Distance HDMI Extension

  • Receives HDMI signals up to 328′ @ 1080p with Cat5e/6 or 4K/UHD using Cat6a/7 cable
  • Uses easy-to-integrate category cable for low-cost, reliable system installation

  Extends RS-232, CEC, and Ethernet Control Signals

  • Control signals travel over HDBaseT link to device for maximum control system flexibility
  • Simplifies integration of source, control system, and display²

   

  Rear Panel I/O Connectors

  • Placement of ports on rear panel simplifies wire management
  • Saves installation time and eliminates clutter

  Multi-Channel Audio Compliant

  • Supports PCM, Dolby Digital, Dolby Digital Plus, Dolby
  TrueHD, Dolby Atmos, DTS Digital Surround, DTS-HD Master Audio, DTS:X
  • Allows any multi-channel audio stream to be used within a professional audio system

  Field Updatable Firmware

  • Front panel USB port provides an easy means for kit upgrades
  • Ensures long term system return on investment

  Front Panel Power and Link Status LEDs

  • LED indicators provide power and HDBaseT link status information
  • Provides easy setup and troubleshooting

  Low-Profile 1″ High Quarter-Rack Enclosure Width

  • Easy installation into confined spaces behind displays and above projectors
  • Keeps devices out of sight when placed in public spaces