Description
- COLOR -BLACK
- 60-865-12
- EXTRON DVI TWISTED PAIR EXTENDER WITH AUDIO, DECORA WALLPLATE TRANSMITTER – BLACKThe Extron DVI 201 A D is a decorator-style transmitter and
receiver set that enables DVI or HDMI signals to be carried over
distances significantly beyond the capability of standard DVI or HDMI
cables. In addition, it can accept and transmit stereo audio and RS-232
or IR signals. Linked together using two economical and
integration-friendly shielded CATx or Extron STP201 cables, the
DVI 201 A D transmitter and receiver work together to send single link
DVI-D or HDMI signals over 200 feet (60 meters) for HDTV and
XGA 1024×768.The DVI 201 A D offers an ideal, cost
effective means for extending digital video, multi-channel audio, and
control signals from DVI or HDMI-equipped devices. The HDCP-compliant
DVI 201 A D enables the long distance transmission of HDTV signals with
HDCP for copy protection of digital television broadcasts and high
resolution digital video output from DTV tuners, DVRs, and Blu-ray Disc
players. The DVI 201 A D is fully compatible with HDMI signals when used
with the appropriate adapters from Extron.Several features facilitate convenient, streamlined system
integration. The DVI 201 A D supports transmission of balanced or
unbalanced stereo audio signals, when a separate audio cable is
installed between the transmitter and the receiver. RS-232 or IR signals
from a control system can also be transmitted over the same cabling as
the DVI signals, providing remote control of a projector or flat-panel
display. An LED indicator provides a quick means of verifying power and
signal presence. Additionally, either the transmitter or receiver can be
remotely powered over this cabling, so that external power is necessary
for only one of the devices.The DVI 201 A D can be used with shielded CATx cables to extend
1920×1200 and HDTV 1080p/60 signals up to 100 feet (30 meters). However,
when used with Extron STP201 Shielded Digital Twisted Pair Cable, these
signals can be extended up to 150 feet (45 meters). Extron STP201
cables are specially designed for superior digital signal transmission
performance, featuring an S/FTP design with individually foil wrapped
conductor pairs and overall braided shield for noise immunity and low
crosstalk.The DVI 201 A D transmitter and receiver are designed for
wall-mounting with the included decorator-style wallplates. Both devices
are also available separately, and may be matched with the standard
desktop DVI 201 transmitter or receiver to suit the installation
requirements of a specific application.Features
- Transmits single link DVI-D and control signals over CATx cables
— Standard UTP/STP cables provide an economical, easily installed cable solution. - Inputs: DVI-I connector, captive screw connector, and 3.5 mm stereo mini jack – DVI 201 A D Tx
- Outputs: DVI-I connector, captive screw connector, and 3.5 mm stereo mini jack – DVI 201 A D Rx
- Sends 720p,
1080i, and XGA (1024×768) signals over 200 feet (60 meters), 1080p/60
and 1920×1200 signals over 100 feet (30 meters) with shielded CATx cable
— Extron STP201 Shielded Digital
Twisted Pair Cable allows 1080p/60 and 1920×1200 signals to be sent 50%
further than with shielded CATx cable. - Extron strongly recommends using individually shielded twisted pair cabling for optimal performance
- Extron
STP201 Digital Twisted Pair cable provides added protection from outside
interference and increases overall signal transmission distance - Supports EDID and HDCP transmission
— DDC channels are actively buffered, allowing pass-through of EDID and HDCP information to attached display. - Transmits additional stereo audio signals
— The DVI 201 A D can send balanced or unbalanced stereo audio signals that accompany the video, over a separate audio cable. - Bidirectional RS-232/IR pass-through
— Bidirectional RS-232 control or
IR signals can be transmitted alongside the video signal, so that the
remote display can be controlled without the need for additional
cabling. - Remote powering of transmitter or receiver
— Only one power supply is necessary to power both devices. - LED indicator for signal presence and power
- Fully supports HDMI signals when used with optional Extron HDMI-DVI adapters
— Supports HDMI embedded audio and CEC – Consumer Electronics Control signal transmission. - Compatible with all HDMI 201, DVI 201, MTP/HDMI U R, and MTP/HDMI U T A D models
— Enables mixing and matching of desktop and wallplate transmitters and receivers to meet application requirements. - Mounts in an included decorator-style wallplate
— The DVI 201 A D transmitter and
receiver can be installed with a one-gang electrical box or Extron
MR 100 Mud Ring, part # 70-519-12. - Highly reliable, energy-efficient external universal power supply included with Tx models and Tx/Rx sets, replacement part #70-775-01
— Provides worldwide power compatibility, with high demonstrated reliability and low power consumption for reduced operating costs.